Philips SHB7110 User Manual

Philips Tapster  
SHB7110  
EN Bluetooth stereo headset  
1
Welcome  
With the intuitive simplicity of your Philips  
Tapster Bluetooth stereo headset with touch  
and gesture controls nothing gets between you  
and your music. Let FullSound enhancement  
amaze you with rich and lively music. EverClear  
technology minimizes echo and background  
noise for clear conversations.Angled Acoustics  
design leads to a snug fit of the headset for  
optimum comfort and a perfect acoustic seal for  
a great sound experience.  
Spend a few minutes to learn more about your  
headset and you will be ready to fully immerse  
yourself into your music and calls. Enjoy the  
Philips Tapster experience!  
2.2  
Electric-, Magnetic- and  
Electromagnetic Fields ( EMF )  
2
Important  
1
Philips Electronics manufactures and sells  
many products targeted at consumers,  
which, like any electronic apparatus, in  
general have the ability to emit and receive  
electromagnetic signals.  
One of Philips leading Business Principles  
is to take all necessary health and safety  
measures for our products, to comply with  
all applicable legal requirements and to stay  
well within the EMF standards applicable at  
the time of producing the products.  
Philips is committed to develop, produce  
and market products that cause no adverse  
health effects.  
2.1  
Hearing safety  
Danger  
To avoid hearing damage limit the time you use  
the headphones at high volume and set the  
volume to a safe level.The louder the volume  
the shorter is the safe listening time.  
Be sure to observe the following  
guidelines when using your headphones.  
Listen at reasonable volumes for reasonable  
periods of time.  
Be careful not to adjust the volume  
continuously upwards as your hearing adapts.  
Do not turn up the volume so high that you  
can’t hear what’s around you.  
Excessive sound pressure from earphones  
and headphones can cause hearing loss.  
You should use caution or temporarily  
discontinue use in potentially hazardous  
situations.  
Using this headset with both ears covered  
while driving is not recommended and may  
be illegal in some areas while driving.  
For your safety avoid distractions from  
music or phone calls while in traffic or other  
potentially dangerous environments.  
Philips confirms that if its products are  
handled properly for their intended use,  
they are safe to use according to scientific  
evidence available today.  
5
Philips plays an active role in the  
development of international EMF and safety  
standards, enabling Philips to anticipate  
further developments in standardization for  
early integration in its products.  
2.4  
Notes for battery disposal  
2.3  
General maintenance  
If in your country there is no collection /  
recycling system for electronic products you  
can protect the environment by removing the  
battery before disposing the headset.Your  
product contains a built-in rechargeable battery  
covered by the European Directive 2006/66/  
EC, which cannot be disposed of with normal  
household waste.Take your product to an official  
collection point or service centre where a  
professional can remove the battery.  
To avoid damage or malfunction:  
Do not expose the headset to excessive heat.  
Do not drop your headset.  
Apparatus shall not be exposed to dripping  
or splashing.  
Do not allow your headset to be submerged  
in water.  
Do not use any cleaning agents containing  
alcohol, ammonia, benzene, or abrasives.  
The main plug of AC/DC adapter is used as  
the disconnect device, the disconnect device  
shall be readily operable.  
Removing the battery will destroy the product.  
If cleaning is required use a soft cloth, if  
necessary dampened with a minimum amount  
of water or diluted mild soap, to clean the  
product.  
About operating and storage  
temperatures  
Do not operate or store in a place where  
temperature is below -15ºC (5ºF) or above  
55ºC (131ºF) as this may shorten your  
battery life.  
The integrated battery shall not be exposed  
to excessive heat such as sunshine, fire or the  
like.  
5
2.5  
Notice for USA  
IMPORTANT NOTE:  
FCC / IC Radiation Exposure Statement:  
This equipment complies with FCC / IC  
radiation exposure limits set forth for an  
uncontrolled environment. End users must  
follow the specific operating instructions for  
satisfying RF exposure compliance.  
This device complies with Part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any  
interference received, including interference that  
may cause undesired operation.  
This transmitter must not be co-located or  
operating in conjunction with any other antenna  
or transmitter.  
This equipment has been tested and found  
to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable  
protection against harmful interference in a  
residential installation.This equipment generates,  
uses and can radiate radio frequency energy  
and, if not installed and used in accordance with  
the instructions, may cause harmful interference  
to radio communications. However there is  
no guarantee that interference will not occur  
in a particular installation. If this equipment  
does cause harmful interference to radio or  
television reception, which can be determined  
by turning the equipment off and on, the user is  
encouraged to try to correct the interference by  
one or more of the following measures:  
Address for Philips accessories service  
center:  
Philips accessories and computer peripherals  
Ledgewood  
NJ 07852 USA  
2.6  
Notice for Canada  
Operation is subject to the following two  
conditions:  
1
This device may not cause interference and  
This device must accept any interference,  
including interference that may cause  
undesired operation of the device.The term  
“IC:” before the certification / registration  
number only signifies that registration  
was performed based on a Declaration of  
Conformity indicating that Industry Canada  
technical specifications were met. It does  
not imply that Industry Canada approved the  
equipment.  
Reorient or relocate the receiving antenna.  
Increase the separation between the  
equipment and receiver.  
Connect the equipment into an outlet on  
a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/  
TV technician for help.  
Warning  
2.7  
Trademarks  
Changes or modifications made to this  
equipment not expressly approved by Philips  
may void the FCC authorization to operate this  
equipment.  
Trademarks are the property of Koninklijke  
Philips Electronics N.V. or their respective  
owners.The Bluetooth word mark and logos are  
owned by the Bluetooth SIG, Inc. and any use  
of such marks by Koninklijke Philips Electronics  
N.V. is under license.Tapster, EverClear  
and FullSound are trademarks belonging to  
Koninklijke Philips Electronics N.V.  
3
What’s in the box:  
Optional earhooks  
Carrying Case  
Exchangeable rubber ear caps  
Philips Tapster Bluetooth stereo  
headset SHB7110  
SHB7110  
User manual on CD  
Quick Start Guide  
AC Charger (100-240V)  
3.1  
What else youll need  
A mobile phone that is capable of Bluetooth  
stereo streaming, i.e. that is compatible with the  
Bluetooth A2DP profile.  
Other devices (Notebooks, PDA’s, Bluetooth  
adapters, MP3 players etc.) are also compatible if  
they share the Bluetooth profiles supported by  
the headset.These profiles are:  
For wireless stereo listening:  
The Bluetooth Advanced Audio Distribution  
profile (A2DP).  
For wireless music control:  
The Bluetooth AudioVideo Remote Control  
profile (AVRCP).  
For wireless handsfree communication:  
The Bluetooth headset profile (HSP) or the  
Bluetooth Handsfree profile (HFP). The  
Philips Tapster Bluetooth stereo headset  
features BluetoothVersion 2.1+EDR, but it  
will also work with devices featuring other  
Bluetooth versions that support the profiles  
above.  
4
What you can do with  
your Philips Tapster  
Bluetooth stereo headset  
With your PhilipsTapster Bluetooth  
stereo headset you can:  
Lead wireless hands-free conversations  
Wirelessly listen to music  
Wirelessly control music  
Switch between calls and music  
5
Overview of your Philips Tapster Bluetooth stereo headset  
LED indicator light  
Exchangeable  
rubber ear cap  
On/Off  
Microphone  
Left earpiece  
Right earpiece  
Touch sensitive area  
Charging socket  
Touch sensitive area  
Left earpiece  
Right earpiece  
Caution  
Finish your call before charging the headset, as  
connecting the headset for charging will cut an  
ongoing call. During charging you can operate  
the headset normally.  
6
Get started  
6.1  
Charge your headset  
Plug the charger into a wall outlet and connect  
the charger cable to the headsets charging  
socket.  
Before you use your headset for the first time,  
charge the battery for 6 hours for optimum  
battery capacity and life time.  
During recharging the LED indicator will show a  
red light. The LED will turn off once charging is  
complete. If you try to charge the headset when  
it is full the LED will not light up.  
Warning  
Use only the original charger or a standard  
aftermarket micro USB cable for charging. Using  
another charger may damage or destroy your  
headset.  
Typically a full charge will take 2 hours, during  
this time you can use your headset for calls and  
music.  
Tip  
You can save energy and protect the  
environment by unplugging the charger after  
charging is complete.  
10  
Make sure your mobile phone is on and its  
Bluetooth feature is enabled.  
6.2  
Pair your PhilipsTapster Bluetooth  
stereo headset with your mobile  
phone  
Your Philips Tapster Bluetooth stereo headset  
must be paired to your mobile phone before  
connecting and using it for the first time with  
your phone. “Pairing” will establish a unique  
encrypted link between your mobile phone and  
your headset.  
Press On/Off on the right earpiece  
until the LED starts blinking red and blue  
alternately.The headset will now remain in  
“pairing mode” for 5 minutes.  
Pairing has to be done only once, before  
using your headset with your mobile  
phone or another Bluetooth device for the  
very first time.  
Only if you pair more than two different  
Bluetooth devices with your headset, you may  
need to pair the previously paired devices  
again.Your headset can store up to two  
paired devices in its memory, if you pair more  
than two devices the oldest paired device is  
overwritten.  
LED  
“Pairing” is different from “connecting” as  
pairing typically only has to be done once,  
whereas the phone and headset need to  
“connect” every time one of the two devices  
was turned off or out of range.With typical  
phone settings your Philips Tapster Bluetooth  
stereo headset will connect automatically to  
your phone after you turned on the headset.  
Pair the headset with your mobile phone as  
described below. A sample pairing is shown  
below.  
To pair your headset with your  
mobile phone  
Check your phone’s user manual for specific  
details.  
1
Make sure your headset is charged and  
turned Off.  
Access the Bluetooth menu on your mobile  
phone typically called “Setup”,“Settings”,  
“Bluetooth” or “Connectivity”.  
Select the option to discover, add or search  
for a Bluetooth device.After a few seconds  
your phone should indicate that it has found  
the “Philips Tapster”.  
Upon selecting the “Philips Tapster” on your  
mobile phone typically you will need to  
confirm the pairing and enter a passcode.  
charging socket  
on/off  
11  
Please enter the headsets passcode “0000”  
(four zeros).  
Optional: For an extra-secure sports fit,  
attach the earhook.  
After successful pairing, the headset will connect  
to the mobile phone.You will hear a long beep  
to confirm successful pairing and the headsets  
LED will change from flashing red/blue to  
B
A
periodically flashing blue every three seconds.  
6.3  
Fitting your headset  
A. Insert the ball between the earpiece and the  
earshell until it rests in the socket which  
is located between the earpiece and the  
earshell.  
B. Rotate the hook to fit your ear.  
C. Slide the hook over your ear.  
D. Follow steps 2 and 3 as above.  
1
Select your cap size for the best find and  
optimum sound performance. It is not  
unusual to fit two different exchangeable  
rubber ear cap sizes on the right and left  
earpiece.  
L
M
S
Place the exchangeable rubber ear cap in  
your ear and rotate the headset backward  
for a snug fit.  
Bring the connecting wire to the back of the  
neck and insert the second earpiece.  
1ꢀ  
Tip  
To avoid accidental activation of music or calls  
the touch sensitive areas of the headset are only  
enabled after you inserted the headset in your  
ears.You will hear an ascending activation and  
descending de-activation tone when inserting or  
removing your Philips Tapster Bluetooth stereo  
headset.  
7
Using your touch  
sensitive Philips Tapster  
Bluetooth stereo headset  
7.1  
Connect your PhilipsTapster  
Bluetooth stereo headset to your  
mobile phone  
The whole outer shell of the earpieces is touch  
sensitive.  
Touch sensitive surface  
Turn on the headset by pressing On/Off until  
the LED lights up. Once turned on the headset  
will reconnect automatically to the last device it  
was connected to. If the last connected device is  
not available the headset tries to reconnect to  
the second to last device that was connected to  
the headset.  
You can control all functions of the headset with  
these basic motions.  
If you turn the mobile phone or its Bluetooth  
feature on after turning on the headset connect  
the headset from your mobile phones Bluetooth  
menu.  
Tap  
Tap the surface  
Double tap  
Tap the surface twice quickly  
7.2  
Automatic power saving  
Press  
If your headset cannot find any Bluetooth device  
to connect to in range within five minutes it will  
automatically power down to save battery life.  
Press and hold for approximately 1 second  
Slide  
Slide your finger forward or backward  
across the surface of the earpiece  
7.3  
Controlling your touch sensitive  
PhilipsTapster Bluetooth stereo  
headset  
Your Philips Tapster Bluetooth stereo headset  
uses intuitive touch controls so you can easily  
control your music and calls. After a few  
minutes of familiarizing yourself with the new  
touch controls you should find this way of  
controlling the headset faster and simpler than  
button based headsets.  
1ꢁ  
The table below shows how to control your music and calls with these basic motions.  
Tip  
You will find that all of the call functions are located on the right earpiece so you can use the  
headset for calls even if the left earpiece is not in your ear.  
Left  
Right  
Power  
Power  
N/A  
On / off  
Press  
Music  
Music  
Next song /  
previous song  
Stop  
Slide forward / backward  
Press (hold 1/2 sec)  
Volume  
Slide forward / backward  
Tap  
up / down  
Play / pause  
FullSound (natural / Double tap while music is  
dynamic bass)  
playing  
Calls  
Calls  
N/A  
Volume up / down Slide forward / backward  
Answer call  
Tap  
Hang up / reject  
call  
Press (hold 1/2 sec)  
Redial last no.  
Double tap  
Activate voice dial Press (hold 1/2 sec)  
Transfer call to  
phone / headset  
Remove / insert earpiece  
Mute mic  
Double tap during call  
Tap  
Pick up an in-  
coming call and  
put the current  
active call on hold  
Reject an incoming Press (hold 1/2 sec)  
call and continue  
the current active  
call.  
1ꢂ  
7.4  
Storing and carrying your headset  
Your headset comes with a protective carrying  
case for the headset and the optional earhooks.  
Wind the cable that connects the two earpieces  
in the cable groove to neatly store the headset.  
15  
8.2  
Learn about simultaneous use for  
voice and audio  
8
Using more of your  
Philips Tapster Bluetooth  
stereo headset  
Your Bluetooth stereo headset can connect to  
one Bluetooth audio source (supporting the  
A2DP and AVRCP Bluetooth profile) and one  
Bluetooth communication source (supporting  
HFP or HSP Bluetooth profile) at the same time.  
8.1  
Learn about the battery status  
Therefore you can connect your Bluetooth  
stereo headset  
Immediately after turning the headset on, the  
LED will indicate the battery status.  
with a Bluetooth stereo enabled phone to  
both listen to music and lead calls, or  
with a Bluetooth phone that only supports  
Bluetooth communication (i.e. does not  
support Bluetooth stereo (A2DP)) to lead  
calls and at the same time to a Bluetooth  
stereo device (Bluetooth enabled MP3 player,  
Bluetooth audio adapter etc.) to listen to  
music. Make sure to pair the phone first  
with your Bluetooth headset, then turn both  
the phone and headset off to then pair the  
Bluetooth audio device.  
LED behaviour  
3x red blinking  
Battery status  
Less than 25% of charge  
remaining  
2x red blinking  
1x blue blinking  
Less than 50% of charge  
remaining  
50% or more of charge  
remaining  
Approximately five minutes before the battery  
runs out you will hear two short beeps every  
minute to remind you to end the call or transfer  
it to your phone before the battery runs out.  
The LED will also continuously flash red with  
about five minutes of talk time remaining.  
With the SwitchStream feature you can listen to  
music and monitor your calls at the same time.  
While listening to music, you will hear a ring  
tone when receiving a call and can switch to the  
call simply by tapping the earpiece.  
1ꢃ  
8.3  
Learn about FullSound  
FullSound is a smart digital sound enhancement  
algorithm, which runs on a powerful processor  
inside your Bluetooth headset. It restores  
and enhances bass, treble, stereo effects and  
dynamics of compressed music and leads to a  
more natural,“real life” sound experience based  
on years of acoustic research and tuning.  
There are two FullSound settings on your Philips  
Tapster Bluetooth stereo headset:  
The “Natural” FullSound setting is optimized  
for the most natural, audiophile reproduction  
of music, ideal for classical, acoustic, Jazz and  
voice dominated music.  
The “Dynamic Bass” setting emphasizes deep  
frequencies for a more powerful bass ideal  
for Hip Hop,Techno and other bass driven  
music styles, or for extra motivation during  
your workout.  
When you buy the product the “Natural”  
FullSound setting is enabled.To switch between  
the two settings double tap the left earshell  
two times.The “Natural” FullSound setting is  
confirmed by an ascending tone, the “Dynamic  
Bass” FullSound setting is confirmed by a  
descending tone.  
1ꢄ  
9
Technical data for your  
Philips Tapster Bluetooth  
stereo headset  
Intuitive touch and gesture sensitive controls  
FullSound digital sound enhancement for rich,  
lively music  
EverClear echo and noise reduction for clear  
calls  
Angled acoustics ergonomic design  
Up to 6 hours of music playback time  
Up to 7 hours of talk time  
Up to 150 hours of standby time  
Typical time for a full charge: 2 hours  
Rechargeable Lithium-Polymer battery  
(160mAh)  
Bluetooth 2.1+EDR, Bluetooth stereo  
support (A2DP – Advanced Audio  
Distribution Profile,AVRCP – AudioVideo  
Remote Control Profile), Bluetooth mono  
support (HSP – Headset Profile, HFP Hands-  
Free Profile)  
Operating range up to 10 meters (33 feet)  
Frequency Range: 20 Hz to 20 KHz  
Specifications are subject to change without  
notice.  
1ꢅ  
Mobile phone cannot find headset.  
The headset may be connected to  
another previously paired device.  
Turn the currently connected device off or  
move it out of range.  
10 Frequently asked  
questions  
Pairings may have been reset or  
headset has been previously paired with  
other device.  
Bluetooth headset does not switch on.  
Battery is very low.  
Start the pairing process as described in this  
user manual.  
Charge your Bluetooth headset.  
No connection to mobile phone.  
Bluetooth disabled.  
Enable Bluetooth on your mobile phone and  
turn the headset on after turning on the phone.  
Voice dialing or redialing does not work.  
Your mobile phone may not support this  
feature.  
Why does my phones AM/FM radio not  
work when using my Bluetooth headset.  
No AM/FM antenna available.  
Most mobile phones require a corded headset,  
which they use as an antenna, for FM radio  
capability. If your phone supports Internet radio  
this feature will work with your Bluetooth  
headset.  
Headset falls out of ear / does not fit  
properly.  
Chosen exchangeable rubber ear cap not  
fitting.  
Fit the correct exchangeable rubber ear cap size  
for each ear and check previous pages for the  
“insert & twist” fitting motion.Try the earhook  
for extra-stable fit.  
The headset is connected to a Bluetooth  
stereo (A2DP profile) enabled phone, but  
music will play on the phones speaker  
only.  
Phone may have option to listen to music  
via speaker or headset.  
Touch controls are not working.  
Out-of-ear autolock engaged.  
Touch & gesture controls will only work after  
the headset is inserted into your ear. Check for  
the ascending activation sound when inserting  
each exchangeable rubber ear cap.Try to re-  
insert your exchangeable rubber ear cap if you  
did not hear the activation sound.  
Check your phones user guide on how to  
transfer the music to the headset.  
Audio quality when streaming from phone  
is very low or audio streaming does not  
work at all.  
Phone may not be Bluetooth Stereo  
(AꢀDP profile) compatible and only  
support Bluetooth mono (HSP/HFP  
profile).  
Touch controls are too sensitive / not  
sensitive enough.  
Familiarity with touch controls.  
For the first few minutes you may find the  
headsets touch controls too sensitive or  
not sensitive enough.The sensitivity of the  
touch controls has been set to suit a range  
of customers. It may require a few minutes of  
“training” with your headset to get used to the  
new controls.  
Check your phones compatibility.  
1ꢆ  
Audio quality is poor and crackling noises  
can be heard.  
Bluetooth audio source is out of range.  
Reduce the distance between the headset and  
the Bluetooth audio source, or remove obstacles  
between them.  
I hear but cannot control the music on my  
device (e.g. skip forward / backward).  
The music device does not support this  
feature (AVRCP profile).  
Check the user manual of your audio source.  
additional support.  
ꢀ0  
2009 © Koninklijke Philips Electronics N.V.  
All rights reserved.  

PYLE Audio View Series PLVWR8000 User Manual
ProMaster LED STUDIO VL306 User Manual
Philips SHB7100 User Manual
Panasonic Lumix DMC ZS8 User Manual
Panasonic KX TBC10 User Manual
Olympus 12 50 EXPS I User Manual
KitchenAid ULTRA POWER 5KSB52XXXX User Manual
KitchenAid KSB580CR0 User Manual
Kenwood eXcelon KAC X501F User Manual
JVC KD S5M User Manual